Speedway Universal Seat Mounting Frame, Slider and Mounts, Steel

Description

Complete kit includes everything to install one bucket seat into most early cars and trucks with flat floors, Seat mount kit with sliders has an assembled height of 7 inches, Dual locking ball bearing seat sliders provide 7 inches of smooth seat adjustment and positive retention, Tubular steel seat mounting frame works well on flat floors but will require modification to fit a contoured floor, Fully assembled the kit measures 15-1/2-inches wide by 17-1/2-inches long
Universal Seat Mounting Frame, Slider and Mounts
Sku # 91070024
Mfr. Part # 91070024
Condition
New
Brand
Speedway Motors
Sold
Kit
Details
Notes
Upper mounting holes of universal seat mount are 11" center to center front to rear and 12" center to center side to side
Universal seat mount floor mount holes are 14-1/4" side to side and 18" front to rear, both are center to center of holes in frame
Info
Complete kit includes everything to install bucket seats into most early cars and trucks with flat floors
Dual locking ball bearing seat sliders for smooth seat adjustment and positive retention
Seat sliders provide 7 inches of front-to-rear adjustment for driver/passenger comfort
Seat mounting frame constructed of 1-inch OD tubular steel with .813-inch OD cross bars for strength
Frame can be modified for custom installations by cutting the legs down and welding
Seat mount kit with sliders has an assembled height of 7 inches
Assembled dimensions of 15-1/2-inches wide by 17-1/2-inches deep
Includes all fasteners and spacers to mount seat plates to sliders and sliders to frame
Does
NOT
include fasteners to mount seat frame to vehicle
Seat frame mounting bolt hole pattern is 14-1/4-inches x 18-inches center-to-center
Make Those Long Hauls Comfortable
There is nothing like getting out on the open road and taking a trip in your hot rod. Multi-state events where you are behind the wheel for several hours at a time mean your driving position must be one of comfort and control. Having the seat positioned just right, a tilt steering column, and proper pedal placement are all key to enjoying the ride and not arrive at your destination feeling like a pretzel.
Tilt steering columns are an easy upgrade, and we offer everything you would need to make that upgrade to your vehicle. Same goes for our huge selection of gas and brake pedal assemblies. So, when it comes to getting your aftermarket seats just right in your early hot rod, don't sweat it, we have you covered there too with our Universal Seat Mount and Slider Kit.
Universal Seat Mount Works Best With Flat Floors But Can Be Modified to Fit
With a mounting bolt pattern of 14-1/4-inches x 18-inches center-to-center the steel tube frame in our Universal Seat Mount and Slider Kit will fit most any flat floor of an early pre-war car or pickup truck. Order a pair of these and update your classic ’40s or ’50s bench seat ride to a pair of buckets, providing more support and comfort and room to add a center console!
Of course, if your ride’s floor is not totally flat a little cutting and welding will allow our steel tube frame to conform to just about anything. Shorten the legs or lengthen the legs as needed to get just the right seat position you are looking for. On flat floor installations our kit should work as delivered with little to no modifications. However, some customers may feel the seat height is too tall, and in these instances cutting the universal seat mounting frame down to your desired working height will be your best course of action for a comfortable driving position.
We include all hardware to mount the seat sliders and seat mounting flanges to the steel frame and even include 1/2-inch steel spacers for clearance between the seat and sliders so that the slider mechanisms work properly without binding. This provides a 7-inch overall height to the assembly, which is not usually a problem in early hot rods or pickup trucks with a completely flat floor. However, you will need your own seat mounting hardware (often included with the seat) and hardware to mount the steel tube frame to your floor.
Includes All Major Components to Mount Your Bucket Seat
Our Universal Seat Mount and Slider Kit begins with our universal seat brackets built from a 1-inch OD round tube steel frame with .813-inch OD cross bars for strength and support. These steel tube frame bucket seat mounting brackets are 5 inches tall and are designed for early hot rods and pickup trucks with a low and flat floor pan area, unlike later cars of the ’60s and ’70s that utilized welded-in-place automotive seat risers. If your vehicle’s floor is not completely flat the frame can be
cut and modified/welded to fit
your exact needs.
Included is a seat slider kit which features a pair of ball-bearing supported seat sliders with mounting hardware. These universal seat sliders allow up to 7 inches of seat movement to give you that Goldilocks feeling of sitting just right; not too close, or not too far from the steering wheel and pedals. Seat sliders are the perfect upgrade for easier rear seat access as well. The adjustable seat sliders feature individual locks for each side controlled by a single hand lever, making seat adjustments quick and easy without that “seat wiggle” a single locking seat sider can cause. They bolt directly to our bucket seat mounting brackets.
Our Universal Seat Mount and Slider Kit also includes a pair of universal seat mounting plates to aid in facilitating the seat to slider/frame mounting. Depending upon the seat used
there may be some drilling required of the plates
or possibly additional mounting hardware required, so it is best to mock everything up on your workbench before mounting the steel frame base in your ride. If you are looking for universal seat mounting kit with brackets and sliders to mount your aftermarket bucket seats into an early hot rod with a flat floor, this is the kit for you.
Charts
(PDF)
Specs
Material Type
Steel
Finish
Painted
Sold in Quantity
Kit
Hardware Included
Yes
Centerline of Holes
14.25
Overall Height
7.00
Overall Width
15.50
Overall Length
17.50
Tube O.D.
1
MFG. Part #
91070024
Centerline of Holes (Alternate)
18
Notes
User must provide fasteners for mounting kit to floor
Reviews
Great universal seat bracket
Rated
by Wyocutlass71 on June 27, 2021
Summary:
It worked as needed. I had to do some drilling to widen the seat mounting surface but that is to be expected with universal stuff.
Yes, I recommend this product.
Yes
Rated
by Gti guy on June 14, 2021
Summary:
Nice kit.
Yes, I recommend this product.
Great product, fit well, just what I needed
Rated
by Bob on June 01, 2021
Summary:
As these went along with your seat risers and seat adjusters, it might be nice if these frames were available as a 1 pc instead of a 2 piece as it would make a sturdier base for the seat tracks
Yes, I recommend this product.
fit perfect thank you will rwcommend..John C
Rated
by John C on March 06, 2021
Summary:
looking forward to the finished car,. Fit prefect
Yes, I recommend this product.
Perfect fit/Great Quality and Price
Rated
by DVD on February 07, 2021
Summary:
Anyone with basic mechanical skills can assemble
Pros:
Best price on the Internet
No specialty tools needed
Solid, study base
This was a great kit sliding tracks included
Yes, I recommend this product.
Related Items / Suggested Parts
Speedway Universal Bucket Seat Frame Mount Bracket
Speedway Universal Bucket Seat Slider Tracks
Universal Seat Mount Plates
Speedway Aluminum Hot Rod Bomber Seat
Speedway Lightened Aluminum Hot Rod Bomber Seat
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.