-40%
Automatic Sewage Pump w/ Float Switch, 25' cord, 1/2 HP, 115V
Automatic Sewage Pump w/ Float Switch, 25' cord, 1/2 HP, 115V
Automatic Sewage Pump w/ Float Switch, 25' cord, 1/2 HP, 115V
Automatic Sewage Pump w/ Float Switch, 25' cord, 1/2 HP, 115V
Automatic Sewage Pump w/ Float Switch, 25' cord, 1/2 HP, 115V

Automatic Sewage Pump w/ Float Switch, 25' cord, 1/2 HP, 115V

$ 245.46

Availability: 100 in stock
  • Return shipping will be paid by: Buyer
  • Condition: New
  • Item must be returned within: 30 Days
  • Modified Item: No
  • Rated Power: 1/2 hp
  • Features: Automatic
  • Brand: Liberty Pumps
  • Housing Material: Cast Iron
  • Discharge Diameter: 2 in
  • All returns accepted: Returns Accepted
  • Supply Voltage: 115 V
  • MPN: LE51A-2
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Custom Bundle: No
  • Number of Phases: 1 Phase

    Description

    Overview:
    The Liberty Pump LE51A-2
    is a submersible automatic sewage pump with a 1/2, 115V motor and a 25' quick-disconnect power cord. This sewage pump is also equipped with an adjustable wide-angle switch that has a series (piggyback) plug for manual bypass operation. In the event of switch failure, the submersible sewage pump cord can be separated and plugged into the electrical outlet, directly bypassing the switch. The turn-on level for this submersible sewage pump is approximately 12" to 16" above the bottom of the basin. The turn off level is approximately 6" above the bottom of the basin. This Liberty sewage pump is capable of reaching a max flow of 112GPM at 25' total dynamic head.
    The Liberty Pump LE51A-2 has a discharge of 2" FNPT and features a 2-vane semi open impeller that can handle solids up to 2". The Liberty sewage pump motor is oil filled and thermally protected. The rotor shaft is made of 416-stainless steel and is supported by lower and upper ball bearings.
    Features:
    Heavy cast iron construction
    Oil filled, thermally protected motor
    Permanently lubricated bearings
    2-vane, corrosion resistant HYTREL impeller
    All stainless steel fasteners and rotor shaft
    Quick-disconnect 25' standard power cord allows replacement of cord in seconds without breaking seals to motor
    Technical Specifications:
    Horsepower: 1/2HP
    Cord length: 25'
    Discharge: 2" FNPT
    Solids Handling: up to 2"
    Shut-off Head: 25'
    Voltage: 115V
    Amps: 12
    Hertz: 60 Hz
    Phase: 1
    Maximum fluid temperature: 140°F
    Height: 14"
    Width: 11.75"
    Weight: 42 lbs.
    Minimum basin diameter: 18"
    Minimum basin depth: 24"